A dedicated light holster is available here with either a MOLLE or 1.5in belt clip attachment.
This light package contains a PLHv2-light head, 18650 handheld body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head, the throw is much better suited to allow PID (Positive ID) at greater distances at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.
Cool White 5700K emitter tint
Made and assembled in the USA
Drivers are fully potted and tested to withstand select fire SCAR 17 recoil.
Approximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.
6061 Series Alum bezel with Mil-Spec Hard Anodizing.
Ultra clear BOROFLOAT® lens allows 98-99% light transmittance.
Length w/ Clicky tailcap: 5 1/2″ / 140mm
Head Diameter: 1 3/16″ / 30.16mm
Lithium CR123 cells are not supported and if used will cause the cells to heat up and possibly explode or catch fire. We recommend the KeepPower 18650 high drain cells which can be found here. Runtime is about 75 minutes with the supplied 18650 cells.
If you have question about batteries please check out our FAQ section about batteries here.
|Dimensions||6 × 3 × 4 in|